This is a library for the Arduino IDE that helps interface with ST's VL6180X time-of-flight distance and ambient light sensor. The library makes it simple to configure the sensor and read range and ...

This is a library of KiCad schematic symbols and PCB footprints for most Arduino modules. You can use them to make your own PCB design which will effortlessly connect with your chosen Arduino module.

[1]: 4K devices have a 9 bits addressing memory map. The 9th bit is set in the device address byte [2]: 16K devices a 11 bits addressing memory map. The 3 MSB are set in the device address byte in ...

The AR488 GPIB controller is an Arduino-based controller for interfacing with IEEE488 GPIB devices via USB. This work was inspired by and has been based on the work originally released by Emanuele ...

Abstract: In this paper, we analyze the working principle of an arduino. These days many people try to use the arduino because it makes things easier due to the ...

Supported platforms: Windows x64, macOS (Intel + Apple Silicon), Linux x64. IntelliSense data (c_cpp_properties.json) is generated after each successful compile. For a new project, IntelliSense mark ...

Arduino driver for the Pixart PMW3901 optical flow sensor. The driver is developed to support the Bitcraze Flow Breakout board. It communicates with the sensor using SPI. The library is using the ...

Optiboot (an older version) is installed by default on the Arduino Uno and (as of 2018) official Arduino Nano boards. It can be installed on all older mega8, 168 or 328 based Arduinos. As of 2019, ...

CSV means comma separated values. It's like a normal "txt" file with commas at regular places to separate some values. Typically the first line of CSV file is a "header", containing names of columns ...

PID stands for Proportional, Integral, and Derivative and is a simple type of controller. PID controllers can provide stable control of nearly any system such as the speed of a motor, position of a ...

Default value for maximum measurement distance is 4m, since HC-SR04 sensor can't measure reliably beyond that. However, if you are using another sensor or if you you don't care about distances larger ...

This repository contains a DCF77 decoder library for Arduino. It was designed with the goal to create the most noise resilent decoder possible. There are also some ready to run examples. For the ...