The BME280 sensor was easier to set up, as it communicates over the I2C serial protocol. This means that we only needed to connect power, ground and two communication wires to the sensor.
PCWorld explains how to create an affordable CO2 air quality monitor using a Raspberry Pi and MH-Z19C sensor for under $40. This DIY project helps monitor indoor air quality since high CO2 levels ...
A reliable indicator of the air quality in offices, classrooms, or living rooms is the CO2 content. In fresh air, the concentration of carbon dioxide is around 400 ppm. This stands for “parts per ...
Here’s something fun from [Chad Kapper] over on HackMakeMod: Escape Room Lockbox with the Cheap Yellow Display. You may have heard of the “cheap yellow display” (CYD), so-called due to the board’s ...
The IM19 is used in conjunction with the UM980 GNSS receiver to provide tilt-compensated Lat/Lon/Alt readings with 1cm accuracy up to 30° tilt angle, and 2cm accuracy up to 60°. Various bits of the ...
There was an error while loading. Please reload this page.
Use Alt + Down Arrow to expand.
Abstract: Traditional transcutaneous carbon dioxide sensing methods often require frequent calibration and the replacement of measurement electrodes, often deployed in large devices. In our pursuit of ...
Some results have been hidden because they may be inaccessible to you
Show inaccessible results